Rust Grip® Benefits
It’s not too good to be true. It’s just better technology!
Why Rust Grip® is the World’s Best Corrosion and Encapsulation Coating
- Rust Grip® used in Australia since 1997
- Single Component – No mixing part A & B; no pot life, no catalyzation
- One-Coat System
- Fast Cure – humidity accelerates curing – ie over 40% humidity 3 coats in a day – micro climate is the key
- Surface Tolerant – Unique for a Polyurethane Rust Grip® on any surface. Minimal surface preparation. Excellent for minimally prepared surfaces, ie. no sandblasting is needed many times
- Embeds and Encapsules; Not just a surface coating
- Limited Surface Preparation
- Self Priming – “Three coats in one” system
- 1 Product shows up to the job site
- Strength – Non leafing aluminium metallics
- Permeability Rating – 0.24 (below 0.5 is excellent)
- UV Protection
- EPA Approved
- Surface Tensile Strength – 6,780+ psi (478 bar) surface tensile strength. It makes an excellent floor coating
- No More Zinc – Aluminium is a stronger and better long-term investment
- Easy to Apply – Brush, Spray or Roller
- Endures 29,700 rub cycles without exposing existing lead based paint
- Higher Surface Temperature – 60°C (Zinc has maximum temperature at 50°C) – more time for application in the heat
- Protects – steel, aluminium, concrete, wood, fibreglass, lead-based paints, and other substrates
- Moisture Barrier – that stops water penetration, prevents corrosion and surface deterioration, and repels dirt, mould, and mildew
- Long Shelf Life – 3 years if unopened
- Patented for encapsulating bio-hazardous materials – (asbestos, lead-based paint, and many hazardous materials) and existing rusted surfaces certified (ASTM E1795) Biohazard Encapsulator
- Breaks The Rules – Minimum Surface Preparation = Better Results
- No Hot Permit Required – (60% of the cost reduced in the surface preparation removing clean up, containment, sound as factors)
- Use in Dangerous environments – Use No Spark Hand tools for preparation of Corrosion and High Pressure Water 6000+ psi removes loose corrosion
- Submergible – in 100% nitric acid without any effects. Designed to withstand acids, salts, and caustics with no loss of integrity
- Class A fire coating – In case of fire, Rust Grip® will help to prevent spread of, and will not contribute to the fire
- 20+ year lifespan – under normal conditions
- Passed 15,000 hours (= 30 years) of salt spray testing which far exceeds the marine specifications with a perfect 10 score with no corrosion development (ASTM C117)
Rust Grip® No More Corrosion! Over 20 Years Rust Protection!
Rated No 1: Rust Grip® is a high performance, tough, aluminium based easy, moisture cured polyurethane encapsulation coating; corrosion, lead paint, asbestos and bio-hazards.
